Mower King 48 inch Trencher for skid steer

The Mower King 48-inch Hydraulic Skid Steer Trencher (Model: SSCT72 / ECSSCT72) is a heavy-duty excavation attachment designed to convert standard and high-flow loaders into high-torque trenching units. Built primarily for electrical conduit installation, pipe-laying, waterlines, and footings, it creates clean, uniform channels up to 48 inches deep and 6 to 12 inches wide.

• Hydraulic Flow Rate: Optimally requires a standard-to-high flow system pushing 20 to 40 GPM.
• System Pressure: Engineered to perform efficiently at a working pressure of 15 MPa (approximately 2,175 PSI) up to 3,000 PSI.
• Operating Weight: Weighs approximately 893 lbs empty, providing substantial down-pressure for penetrating tough clay or hardpan.
• Three-Hose System (Case Drain Required): Outfitted with three hydraulic lines—two primary 1/2″ lines for hydraulic input/output fluid cycle, and a dedicated case drain line. The case drain is crucial for releasing backpressure on the hydraulic motor, protecting internal seals from catastrophic failure during high-load digging.